A coil, or antenna, positioned within the imaging volume and connected to the receiver circuitry that is used to detect or receive the MR signal from the patient as the disturbed spins relax back into their equilibrium distribution. Also called receive-only coil.
Special-purpose coils are designed to optimize the SNR from a given region of the body. State-of-the-art coil systems include the use of four or more coils with four separate receivers. This method is often referred to as a phased array system. Receiver coil types include also solenoid, planar, volume and quadrature coils. The quality of the MR images depends on the SNR of the acquired signal from the patient. SNR is of the utmost importance in obtaining clear images of the interior of the human body.

The portion of the MRI system that produces the RF current and delivers it to the transmitting coil (antenna). The RF signal produced by the transmitter is used to excite the protons in the imaging volume. Phase sensitive detectors (electronic device in which the output is dependent on the instantaneous difference in phase between two input signals) form part of the frequency synthesis pathway.

Pacemaker lead wires, ECG, and plethysmographic cables can also as surface-coil connections act as antennae. Usually the materials of such wires are not ferromagnetic.

Gradient and radio frequency fields may induce current into these wires and thus cause fibrillations and burns. This presents a risk to the patient and must be eliminated before the examination. The risk of heating during the MRI scan is dependent on the length and the material of these wires as well as the used field strength. If these wires are outside the RF field there is no risk of heating to expect.